Laserfiche WebLink
Piping Diameter: 1.125" OD, 1.000" ID, <br /> Suction Hose Material of Construction: synthetic rubber composite <br /> Suction Hose Diameter: 0.1" ID, 1.4 OD <br /> Pump location(s): Mounted on steel shelf anchored <br /> to adjacent cinder block wall inside service bay (See <br /> Appendix "A"). <br /> Pump type/capacity: Pneumatically operated Lincoln 1" size, 42 <br /> gallons per minute capacity. <br /> Pump Material of Construction: Wetted Parts: Buna-N, acetal, stainless <br /> steel, PTFE. Non-Wetted Parts: Epoxy coated steel <br /> Material Storage: <br /> Materials and characteristics " _ <br /> Liquids in the used motor oil storage tank are a mixture of motor oil, <br /> transmission fluid and power steering fluid. All of these are <br /> classified as type IIIB flammable and combustible liquids per Table <br /> B.1 of NFPA Code 30A. <br /> These liquids have the following HMIS Hazard Ratings: <br /> Health: 1 (slight) <br /> Flammability: 1 (slight) <br /> Reactivity: 0 (minimal) <br /> Specific Gravity: 0.86 <br /> Operating Capacity: 500 gallons <br /> Chemical compatibility findings: The materials identified above are compatible <br /> for contact with or proximity to the equipment, tank or tank system in this <br /> assessment. Initials- <br /> Visual Inspection <br /> Tank parameters at time of inspection (empty, etc.): Tank level at 50% <br /> capacity <br /> Acute visual evidence of leaks: No evidence of leaks <br /> Condition of interior surface: Good condition <br /> Condition of exterior surface: Good Condition <br /> 4 <br />