Laserfiche WebLink
❑� Northwest Pipe Spill Prevention, Control, and Countermeasure (SPCC) Plan 32 <br /> �--. Company Tracy Plant <br /> areas so the accumulation of precipitation within the pallets is not a concern. Any <br /> discharged material observed in these pallets is removed using sorbent pads / <br /> pillows, appropriate cleaning products, or it is pumped and disposed of properly. <br /> A mobile refueler or wet hose vendor is used to fuel equipment and vehicles <br /> throughout the facility. It is not a stationary tank. Whenever the refueler is parked <br /> for an extended period of time (e.g., overnight parking during non-working hours) <br /> the wheels of the refueler will be chocked to prevent inadvertent movement outside <br /> containment. The mobile refueler carries a spill containment kit capable of <br /> containing the most likely type of spill (Table 5.2). <br /> 6.3 Facility Transfer Operations, Pumping, and Facility Processes <br /> Oil transfer operations at this facility include: <br /> • The transfer of diesel fuel from a vendor tanker truck to the 10,000-gallon AST <br /> (occurs over secondary containment). <br /> • The transfer of gasoline from a vendor tanker truck to the 300-gallon AST. <br /> • The transfer of gasoline and diesel fuel from a vendor tanker truck to the mobile <br /> refueler. Transfers into the mobile refueler are monitored (observed carefully <br /> by both Northwest Pipe Company— Tracy Plant and the vendor). <br /> • The transfer of automatic transmission fluid from a vendor tanker truck to the <br /> 500-gallon AST (monitored visually each time). <br /> • The transfer of motor oil from a vendor tanker truck to the 500-gallon AST <br /> (monitored visually each time.) <br /> • The transfer of hydraulic fluid from a vendor tanker truck to the 500-gallon AST <br /> (monitored visually each time). <br /> • The transfer of diesel fuel from a vendor tanker truck or the mobile refueler into <br /> the 80-gallon emergency generator belly tank (monitored visually each time). <br /> • The transfer of hydraulic oil from a vendor tanker truck or a smaller Northwest <br /> Pipe Company transfer vessel into any of the following tanks and monitored <br /> visually each time: <br /> 0 114-gallon Byard Weld Oil tank <br /> 0 120-gallom Helical Weld Oil tank <br /> 0 200-gallon Bell Expander West Side tank <br /> 0 350-gallon Bell Expander East Side tank <br /> 0 200-gallon Hydrotest Oil tank <br /> 0 110-gallon Butt welder <br /> 0 114-gallon Skimmer hydraulic tank <br /> 0 96-gallon Small expander <br /> 0 80-gallon Offset rolls <br /> 0 134-gallon Large expander <br /> 0 170-gallon D-load machine <br />