Laserfiche WebLink
o Setting up security or physical barriers to exclude unnecessary personnel <br /> from the general area <br /> o Minimizing the number of personnel and equipment on-site consistent with <br /> effective operations <br /> o Establishing work zones within the site <br /> o Conducting operations in a manner to reduce the exposure of personnel and <br /> equipment <br /> o Minimizing the airborne dispersion of contaminants <br /> o Implementing the appropriate personnel and equipment decontamination <br /> procedures <br /> B. Field Operations Work Area <br /> Work areas (zones) will be established based on anticipated contamination. Within these <br /> zones prescribed operations will occur utilizing appropriate personal protective equipment. <br /> The planned zones are: , <br /> 1.Exclusion Area (contaminated). The actual areas where work is being performed <br /> are considered to be the exclusion areas. Access to these areas will be <br /> strictly limited to the personnel needed to conduct the work being <br /> performed. <br /> 2.Contamination Reduction Area. An area near to each active work zone will be <br /> designated as the contamination reduction area. Disposable protective gear <br /> will be removed and placed in garbage bags prior to leaving the reduction <br /> zone. Heavy equipment and non-disposable gear will be cleaned at a <br /> decontamination area within this zone. <br /> 3.Support Area(non-contaminated). Areas located away from active work areas and <br /> out of the zone of potential impact of hazards will be used for staging and <br /> support of the work being performed on site. Any materials, equipment, or <br /> clothing of personnel must be fully decontaminated prior to entering these <br /> areas. <br /> 3051351D/SSP2 8 November 2, 1995 <br />