COMPLIANCE INFO_1990-2001 - Laserfiche WebLink

Home Browse Search

.11111e1'ullo Fiberglass Pipe Division Fiberglass Pipe Division Ameron (Pte) Ltd. Post Office Box 801148 J.F. Kennedylaan 7 No. 7A, Tuas Avenue 3 Houston, Texas 77280 4191 MZ Geldermalsen Singapore 2263 Phone (713) 690-7777 The Netherlands Phone 862-1301 Telex 293096 AMERON FPD Phone 03455-73341 Telex 38960 AMERON RS FAX (713) 690-2842 Telex 40257 BONDS NL FAX 862-1302 Performance requirements FAX 03455-75254 Manufacturing plants. Burkburnett, Texas, Spartanburg, South Carolina, Geldermalsen, The Netherlands and Singapore. Bondstrand pipe is also manufactured in Japan and Saudi Arabia. integral epoxy liner and a reinforced epoxy exterior coating. • • Dualoy 3000/L Fiberglass Pipe and Fittings underground piping for petroleum products, alcohols, and alcohol -gasoline mixtures. Scope This specification covers the approval, performance, materials and physical properties requirements for buried petroleum product piping in 2- through 6 -in (25-150 mm) diameters for working pressures to 300 psi (2.07 MPa) and temperatures ranging from 150°F (66°C) to —40°F (-400C). Listings All components furnished under this specification shall be listed with Underwriters' Laboratories (UL) or Underwriters' Laboratories of Canada (ULC) for use as below -grade petroleum product piping. All pipe, fittings and adhesive must demonstrate performance which meets or exceeds testing specified in UL . • subject 971 for all fluids. Performance requirements Pipe and fittings shall be suitable for continuous operation at the pressures listed below at a sustained temperature of 150°F (660C). The pipe shall have an integral epoxy liner and a reinforced epoxy exterior coating. Pressure Ratings Nominal Petroleum Products Petroleum Products, Size Only Alcohols, and Alcohol - Gasoline Mixtures (in) (mm) (psi) (MPa) (psi) (MPa) 2 50 300 2.07 175 1.21 3 80 200 1.38 125 0.86 4 100 150 1.03 100 0.69 6 150 175 1.21 100 0.69 Materials Liner All filament -wound pipe shall contain a resin -rich liner which shall have a minimum thickness of 0.015 inches (0.38 mm). The resin system used in the liner shall be chemically resistant epoxy resin which has been demonstrated to be satisfactory for the intended service. Structural wall The resins, reinforcements, colorants and other materials when combined as a composite laminate structure shall meet the performance requirements of this specification. Glass fiber reinforcement shall be Type E glass with an epoxy- • • compatible finish. Glass fiber content shall be not less than 60 percent by weight of the reinforced structural wall. Exterior coating The pipe eterior shall have a 0.005 -inch (0.13 mm) thick resin -rich coating with an organic fibrous reinforcement. 0 1986 Ameron FP275B (R10/89) Supercedes FP275A (R8/88) Printed in U.S.A. 10M