Laserfiche WebLink
Adjacent to the roll form line, a container labeled "hazardous waste gear oil" <br />had an accumulation start date that exceeded the 90 day storage time. The <br />label on this container lacked the name and address of the person producing <br />the waste. <br />At the end of the roller line, I observed two large pieces of steel that appeared <br />to be used as some type of cover to a structure located below grade. Mr. Ito <br />asked Mr. Mathias what was below the steel. Mr. Mathias stated there is a <br />concrete structure lined with epoxy that catches the spent roll form coolant. A <br />coolant sludge is generated in the tank which is cleaned out as needed. <br />Mr. Mathias led us to the welding and assembly area located on the west side <br />of Sacramento St. Adjacent to the welding and assembly area is the forklift <br />repair area. Immediately inside the east roll up door, I observed a 55 gallon <br />drum platinum in color, labeled "hazardous waste", with an incomplete label. In <br />this area, used oil filters are stored for recycling. <br />Mr. Mathias then led us to the maintenance shop where used oil is kept in an <br />aboveground tank, labeled "hazardous waste". This label lacked the name of <br />the person producing the waste. This tank is situated over an aboveground <br />catch basin that provides secondary containment. In the maintenance shop, <br />decontamination equipment was not visible. When Mr. Eggleton was asked <br />why there was not decontamination equipment at this location, he stated <br />Interlake plans on installing some, but it has not been installed. <br />Next, we were taken to the area referred to as "paint and finish" located on the <br />east side of Sacramento St. In the vicinity of the spray booths, I observed a <br />black 55 gallon drum labeled "Hazardous Waste MEK T.B.R". The label lacked <br />the name and address of the person producing the waste. Adjacent to the four <br />stage washer, I observed an aboveground tank referred to as the "Dump Tank". <br />Mr. Eggleton stated this tank receives wastewater from the steel washing <br />process. The wastewater is allowed to experience separation. The sludge that <br />settles out is managed as a hazardous waste. The aqueous wastestream is <br />discharged to the city of Lodi P.O.T.W. Mr. Eggleton was unable to furnish <br />data to determine if the waste entering the "Dump Tank" is a hazardous waste. <br />In the paint and finish area next to the "paint kitchen", I observed at least one <br />green, 55 gallon drum, labeled "Non -Hazardous Waste" containing what Mr. <br />Eggleton identified as paint waste. This container was not labeled correctly. <br />Adjacent to the spray booths located next to the "paint kitchen", I observed a <br />black, 55 gallon drum labeled "hazardous waste" that did not have a lid or a <br />label. Mr. Mathias indicated the drum collects paint waste from the spray <br />booths. Hanging on the side of one spray booth, 1 observed a black five gallon <br />