COMPLIANCE INFO_2016 - 2018 - Laserfiche WebLink

Home Browse Search

• HSC 25290.1(c)(1) Primary containment not tight(after Jun 2004). Liquid was detected at the 87 product union/sheer valve and the 87 product union of the under dispenser containment for dispensers 1/2 and 5/6. The service technicians removed the liquid and tightened the piping, indicating a leak in the primary piping. All primary containment for the UST system must be tight. During the inspection,the technician tightened the piping unions and cleaned out the released fuel. As noted in your Inspection Report, this item was corrected at the time of the inspection. In addition, a full statement regarding the return to compliance for this item was drafted on site with the help of Inspector Aris Veloso, and is attached for your review and records. • HSC 25290.1(c3),25290.2(c3) Secondary containment not constructed to prevent water intrusion. Water was found in the 91 product fill sump,vapor sump,91 product STP sump,and diesel STP sump. Secondary containment shall be constructed to prevent any water intrusion into the system by precipitation, infiltration, or surface runoff. The service technician removed approximately one gallon of liquid from the 91 product fill sump,approximately one cup of liquid from the vent sump, approximately two tablespoons of liquid from the 91 product STP sump,and approximately one teaspoon of liquid from the diesel STP sump and returned the sensors to their proper location. Immediately contact a properly licensed,trained, and certified contractor to address the water intrusion into the vent, 91 product fill sump,91 product STP sump,and diesel STP sump under permit and inspection of the EHD. This was corrected on site. As noted in your Inspection Report, this item was corrected at the time of the inspection. The diesel secondary containment fill sump is not liquid and vapor tight. The gasket for the inner sump opening is missing. Secondary containment shall be impervious to the liquid and vapor of the substance contained and constructed to prevent structural weakening as a result of contact with any hazardous substances released from the primary containment. Immediately contact a properly licences,trained,and certified contractor to make repairs to the UST system under permit and inspection of the EHD. On February 2, 2016, BP Testing and Maintenance Vendor, Gettler-Ryan, Inc., replaced the noted gasket, then returned on February 25, 2016 to check and clean it. A copy of the February 25, 2016 work order is attached for your review and records. It is our policy to address deficiencies, issues of concern, and/or agency requests regarding our retail facilities immediately. Based on the corrective actions detailed above, it is our understanding that the items of alleged non-compliance have been resolved. If this is not correct, please contact me as soon as possible. ManyReg H E U"I'--I VE, MAR 0 2 2016 Sarah Samuels Retail Compliance Coordinator ENVIRONMENTAL NE,61TH nPpApTMENT Enclosure