Laserfiche WebLink
Linden School District April, 1995 <br /> Site Specific Safety Plan Well Installation <br /> WES Project No 4062-R <br /> appropriate measures to reduce the hazard or exposure to the hazard will be <br /> implemented <br /> SECTION 5 <br /> PROTECTIVE EQUIPMENT <br /> A modified Level D protective gear will be used until the extent of the hazard on site has <br /> been determined Personal working in the contaminated zone will be required to wear <br /> appropriate protective clothing <br /> Proper equipment for this level includes <br /> 1 Hard hat, <br /> 2 Boot/shoes - safety or steel-toed, <br /> 3 Safety glasses or safety goggles, <br /> 4 Protective masks for nuisance dust, as required <br /> HEARING PROTECTION <br /> Employees will be protected from the effects of noise exposures which exceed the <br /> noise levels deemed to be safe as defined in 29 CFR part 1900 In operations <br /> where the noise limit exceeds limits, hearing protection shall be provided and <br /> used <br /> SECTION 6 <br /> WORK ZONES <br /> The work zones will be determined by the Project Manager and the Site Safety <br /> Officer before the start of drilling operations <br /> The three zone system will be employed i e exclusion zone, contamination <br /> reduction zone, and support area <br /> SECTION 7 <br /> DECONTAMINATION PROCEDURES <br /> Personnel equipment worn into the Contamination Zone and not disposed of upon <br /> exit will be decontaminated upon leaving the Contamination Reduction Area All <br /> protective apparel such as chemical protective suits, gloves and outer boots will <br /> be disposed of in receptacles located in the Contamination Reduction Zone <br /> Respiratory protective equipment and safety glasses will be washed with <br /> detergent and water solution All equipment decontaminated will be air dried <br />