COMPLIANCE INFO_2012 - 2015 - Laserfiche WebLink

Home Browse Search

Facility Name: Arco #6080 (Page 2) D. Results of Testing/Servicing Complete the following checklist: Software Version Installed: 330.01 ®Yes ❑ No* Is the audible alarm operational? ®Yes ❑ No* Is the visual alarm operational? ®Yes ❑ No* Is the print function operational? ®Yes ❑ No* Were all sensors visually inspected, functionally tested, and confirmed operational? ®Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their proper operation? ®Yes ❑No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. ❑ N/A modem) operational? ®Yes ❑No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary ❑ N/A containment monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate positive shutdown? (Check all that apply) ® Sump Sensors; Dispenser Containment Sensors. Did you confirm positive shutdown due to leaks and sensor failure/disconnection? ®Yes; ❑ No. ❑ Emergency Shut Down (ESD)was tested and found to be working at each station. ®Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device, is ❑ N/A the overfill warning alarm visible and audible at the tank fill point(s) and operating properly? At what ercent of tank capacity does the alarm trigger? 90% ®Yes* ❑ No Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E, below. ❑Yes* ® No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply)❑ Product; ❑ Water; ❑ Brine. If yes, describe causes in Section E, below. ®Yes ❑ No* Was monitoring system set-up reviewed to ensure proper settings? Attach set up reports, if aDDIicabIe ®Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications? E. Comments: We replaced the Veeder-Root back-up battery and put a sticker with the replacement date.