Laserfiche WebLink
gil <br /> u <br /> Section No. 8.0 <br /> Revision No, 6 <br /> Date 6/1/88 <br /> Page 15 <br /> 8.0 DATA REDUCTION AND REPORTING <br /> canonie Environmental Services Corp. Laboratory is highly computer zed with <br /> the majority of computations performed by each analytical instrument's data <br /> system. The chemist or analyst assigned to a project will review the data <br /> from the data system for completeness and proper analyte identification. <br /> Should any recalculations need to be performed, an effort is made to do this <br /> .; on the data system; however, should time not permit, then the method SOP s <br /> t <br /> referred to for the appropriate manual calculation. As space does not permit <br /> the publication of each possible calculation, it is best to refer to the SOP <br /> for the most current equation to perform calculations of the parameter in <br /> question. <br /> After the data has been compiled, it is transferred to a report form which <br /> then goes to data control for report generation. <br /> All of the data generated by Canonie are reviewed by at least two chemists <br /> from each of the various areas. If a second chemist is unavailable to review <br /> the work, then the Quality Assurance Officer will do the second review. The <br /> Quality Assurance Officer randomly reviews work from each section to verify <br /> the documentation and reported results. <br /> The following areas are checked when reviewing the work: <br /> 1. Identification and reported units are correct, and calculations <br /> are correctly performed. <br /> 2. The results obtained for the Samples were within the working <br /> calibration range or were diluted into the working calibration. <br /> range. <br /> 3. The QC results meet acceptance criteria. <br /> Canonie.~ y . <br /> .1v.. <br />