Laserfiche WebLink
AL*A R E R O S O LV® MAINTENANCE <br /> Periodic cleaning and greasing of the puncture pin will assure years of use.With constant,heavy usage, <br /> the puncture pin should be cleaned and greased once a month. <br /> •To clean or replace puncture pin,remove bridge pin at uppermost point of handle. <br /> Entire handle mechanism and puncture pin can be removed. <br /> Gasket deterioration will occur when venting aerosol paints and aggressive solvents,requiring periodic <br /> gasket replacement.To assure proper seal during Aerosolv usage,check gaskets frequently and replace <br /> as required. <br /> •To replace gasket,remove white plastic sleeve from Aerosols housing,then simply pull <br /> out old gasket and snap in replacement. <br /> COMPLIANCE <br /> •By bringing the propellant to atmospheric pressure,Aerosolv achieves compliance with: <br /> > 40 CFR 261.7(b)(1) <br /> > 40 CFR 261.7(b)(1)(B)(2) <br /> > 40 CFR 261.23(a)(6) <br /> •Once relieved of pressure,aerosol cans are not regulated waste(OSWER Directive 9432.01 <br /> (80)).In addition,puncturing aerosol cans to achieve atmospheric pressure is not considered <br /> "treatment",therefore,permitting is not required. <br /> RECYCLING <br /> •Recycling 8,000 aerosol cans reduces solid waste and <br /> increases recycling by one-ton. <br /> •By installing Aerosolv systems on two drums, <br /> non-chlorinated aerosols can be collected separately,then <br /> reclaimed as solvents,resulting in waste minimization <br /> 4W credit. <br /> IL4�1 � •Cans punctured using Aerosolv may be recycled with <br /> other scrap steel. <br /> Aerosolv leaves only a smooth edged hole. <br />