Laserfiche WebLink
Decontamination Procedures <br /> Level B - Personal Protection Decontamination Procedure <br /> The following is the procedure for full Level B decontamination: <br /> Step 1 - Segregated Equipment Drop <br /> Deposit equipment ( tools , sampling devices , notes , <br /> monitoring instruments, radios, etc.. ) used on the site <br /> onto plastic drop cloths or into different containers <br /> which have plastic liners . It would be anticipated <br /> that sampling devices would have a higher potential for <br /> contamination than radios , clipboards , or monitoring <br /> instruments . Hence , a segregated drop reduces the <br /> probability of cross-contamination. <br /> Needed Equipment: Containers of various sizes, plastic <br /> liners , plastic drop cloths . <br /> Step 2 - Boot Covers and Glove Wash <br /> Outer boot covers and outer gloves should be scrubbed <br /> with a decontamination solution of detergent and water. <br /> Needed Equipment : Container ( twenty to thirty gal- <br /> lons ) , decontamination solution (detergent/water <br /> solution ) , two or three long-handled , soft bristled <br /> scrub brushes. <br /> Step 3 - Rinse Off Boot Covers and Gloves <br /> Decontamination solution should be rinsed off boot <br /> covers and gloves using generous amounts of water, <br /> repeat as many times as necessary. <br /> Needed Equipment : Containers ( thirty to fifty gal- <br /> lons ) , high-pressure spray unit , water, two or three <br /> long-handled, soft bristled scrub brushes. <br /> Step 4 - Tape Removal <br /> Remove tape from around boots and gloves and place into <br /> container with plastic liner. <br /> Needed Equipment : Container ( twenty to thirty gal- <br /> lons) , plastic liners . <br />