Laserfiche WebLink
0 <br /> Plumbing Department (D-26) SAF 09-65 Handling Hazardous Materials <br /> Step Action <br /> 4 Put on single-use gloves and safety glasses. <br /> 5 Open the yellow waste bucket and unroll its liner. <br /> 6 Place the liner and waste along with any contaminated PPE (such as, <br /> single-use gloves)into the yellow waste bucket. <br /> 7 Roll down or twist the yellow waste bucket's liner. <br /> 8 Return to the Plumbing Department and immediately re-line the <br /> Plumbing Department red metal can for the next day. <br /> An example of a red metal can with its markings is shown below. <br /> SSW <br /> £ � ro-wmn <br /> ✓r <br /> 2 <br /> Product spills in the All Plumbing Associates must be aware of and look for spills of the various <br /> Plumbing products being stored in the Plumbing Department. <br /> Department <br /> If Plumbing Associates observe spilled materials,they must immediately isolate <br /> the area and call a designated HHM associate who will handle the spill using the <br /> "Procedures for Spills or Unknown Materials" on page 44. <br /> Materials/supplies The materials and supplies required for this department are listed below: <br /> required ® Metal Red Can with flip-top,labeled with a"Hazardous Waste' label and a <br /> decal that reads"Empty Every Night." <br /> 32 Revised: 12 January 2007 <br />