Laserfiche WebLink
CONTAINMENT <br /> SOLUTIONS <br /> _ . <br /> SPECIFICATIONS <br /> SAF . STETTm HAZARDOUS LIQUID STORAGE SYSTEM <br /> WITH ENVIRONMENTAL TANK ENCLOSURE <br /> 1.0 GENERAL TANK DESCRIPTION: <br /> 11 The SafeWaste Aboveground Used Oil Collection and Storage Systems are constructed <br /> in accordance With National, State, and Locally recognized Aboveground Storage Tank <br /> Standards,such as Underwriters Laboratory Standard 142 for the primary tank,National <br /> Fire;Protection AssociationSections 30&30A,and Uniform Fire Code. <br /> 1.2 The SafeWaste Systems provide a minimum of 110% secondary containment for the <br /> primary tank,and 360'radius containment for the primary tank and control assemblies'. <br /> 1.3'' The control assemblies shall be new, and installed on top of the primary tank at the <br /> factory. <br /> 1.4 The anchoring tie downs shall be an integral part of the exterior support feet and;shall be <br /> welded to the bottom of the Environmental Tank Enclosure. <br /> 1.5 The;SafeWaste Systems'must be off-loaded on site with a large forklift or crane. <br /> 1.6 All openings in the primary',tank shall be from the top,with threaded NPT fittings. <br /> 1.7` The SafeWaste Systems shall include a one (1) year warranty for the tanks and <br /> accessories. <br /> 1.8 The SafeWaste manufacturer shall provide proof of a minimum 10 years of <br /> manufacturing SafeWaste Systems. <br /> 2.0 PRIMARY STORAGE TANK: <br /> 2.1 The primary storage tank shall be rectangular in design and constructed of UL specified <br /> steel thickness,with continuous welds. <br /> 2.2 The primary storage tank' shall be constructed and listed=_in accordance with UL 142 <br /> standards. <br /> 2.3 The primary tank shall be fitted with a minimum of: a3f4" product inlet, a 2" overfill <br /> prevention valve, a 2" suction tube for product withdrawal, a 2" primary working vent, <br /> either a 4",.or 6"emergency vent,a"2"product level gauge,and a 1"sampling port. <br /> 2.4 The primary tank shall be pressure tested to UL 142 Standard(minimum 3 to maximum 5 <br /> psi)at the factory, <br /> t <br /> March 2009 • 0Copydght'2W9 • Containment solutions,Inc. •An Rights Reserved • Pub Na.SW5501 B <br />