Laserfiche WebLink
Closure Cost Estimate <br /> for <br /> Delta Plating, Inc. <br /> A. QQjfS for TrgatMent of aste <br /> The following items were taken into consideration: <br /> 1 The type and amount of waste in each tank/container. This value reflects <br /> the maximum amount of waste the tank/container will hold. <br /> 2. The waste will be treated using the owner or operator's own staff and/or <br /> equipment. <br /> 3. Other associated wastes that would have to be removed. <br /> EL Costs for Decontamination of EVAIMIllat <br /> The following items were taken into consideration: <br /> 1 The tanks and/or containers will be decontaminated and the waste <br /> generated from that process will either be treated or shipped out for <br /> disposal. Other treatment equipment (Lee6l'-a,rii,�file, lamella iella se ler batch <br /> (Treatment tan , etc.) must also be considere <br /> The amount of wash water that will be generated in decontamination <br /> processes was estimated. A standard of 10% of the volume of the tank or <br /> container was used. For example: a 500-gallon tank would take <br /> approximately 50 gallons of water for decontamination/cleaning. Filter <br /> presses take approximately 25 gallons. <br /> 2. Ancillary equipment such as piping, fittings, pumps, mixers and anything <br /> else associated with the treatment units will also be decontaminated and <br /> the waste generated from these processes will either be treated or <br /> shipped out for disposal. <br /> 3. There will be approximately twelve (12) drums of ancillary equipment, <br /> piping, filters, wooden floorboards, etc. which will not be amenable to <br /> decontamination and will require removal and disposal. <br /> Delta Plating, Inc. 818 S. Stanislaus St. Page 1.8 <br /> Stockton, CA 95206 <br />