Laserfiche WebLink
- gol ng res ng in to insuM <br /> provimwtesV<T1 <br /> 1. Cutallf4min hole in the containment using a pilot drM and a Circular <br /> hole saw.Do not*xce the cutW or it will frdy the edges of <br /> 2. Use flapper sander,rough sandpaper oremery ckAh to remove all <br /> surface gloss from the pipe wall where the sadc1le isto be bonded. <br /> I Insure that the bondingeu are clean and dry before applying <br /> 4. Mix C:20KT adhesive w=Ming to di a Put NO MMOOM. <br /> S. Apply adhesive to the pipe wall,to the edges of the hole and the in ' <br /> of ft saddle. <br /> S. Align the saddle over Vie Hole and damp in place with two hose clamps. <br /> 7. Tighten the until samm and an adhesive bead <br /> surToundsthesacidle. <br /> 7. At temperahm below Bs°F(18°C),cure the adhesive with a <br /> Chem Cure Pak or heating blanket. <br /> 9. Do not pressurize the containment lime Until the adhesive has gulf <br /> cured- <br /> _ l <br /> as anca� <br /> ��u�r,ra�rnps <br /> 8 <br /> 01 'd WV £t;t t NOW 96-9 t-AON <br />