Laserfiche WebLink
7.3 Test #3: To check setting of greater vacuum switch. <br /> 7.3.1 conditions of system for conducting test: Same as 7.1.1 except <br /> one or more dispensers (Product ) ON. <br /> 7.3.2 Result of test: <br /> Pressure/vacuum gage should show an increase in vacuum to at least <br /> -4.5° W.C. If so, go to step 7.4. If not, adjust greater vacuum <br /> switch (FIGURE 7, page 15) bo get that reading. <br /> NO►I'B: If the owner wants bo see a demonstration of the new system, <br /> tests 7.1, 7.2, and 7.3 are a meaningful end to end system <br /> demonstration. <br /> 7.4 Be sure all mechanical connections, electrical connections, and panel <br /> covers are secure. <br /> At this point the station owner needs to call the local pollution <br /> authority for inspection and initializing of the VC5-400-7 Vapor <br /> Revery System. once the authority has finished the inspection and <br /> initializing, the installation and start-up are ocniplete, and the <br /> system is in normal automatic operational mode. <br /> J <br />