Laserfiche WebLink
- Uth BEAUDREAU <br />BEAUDREAU ELECTRONICS INC. <br />PEAODREAU ELECTRIC IRC- <br />W=r <br />em,waero <br />ptQOE'1404.4 LATCWNG CMiR0LLEe <br />a.mu rexmme<f ronaurfmm otaxm, maw.• <br />A <br />tr <br />f~LE <br />• The Model 406 Pump Cut -Off is a solid state two-part modular system that was specifically <br />// designed for use in containment pans/sumps for dispensers and turbines. The system <br />l- functions as a passive device for monitoring an accumulation of fuel spills and/ or filter <br />leaks. When this accumulation reaches a user specified level, the dispenser or turbine is <br />shut down until the sensor is reset. <br />• The intrinsically safe sensing probe actuates whenever the level of the accumulating liquid <br />reaches a factory preset level of approximately 3/8" water column. <br />• The controller, which also provides an intrinsically safe barrier, is connected to the dis- <br />penser or turbine junction box and operates on either 120 or 240 volts. The controller is fully <br />encapsulated and is approved for use in Class 1, Group D environments. The unit is capable <br />of handling up to 20 amps of electrical load. <br />• The system is easily installed and is connected to existing wiring at the dispenser or tur- <br />bine location, eliminating the need of pulling new wires or breaking concrete. <br />• Additional sensing probes may be ordered for use in multiple compartment containment <br />pans. These probes are available as a Model 406A kit and come complete with a cable <br />splitter. <br />• BEI's impact sensor is also compatible with the Model 406. The impact sensor kit is a <br />Model 408A and also comes with a cable splitter. <br />• The Model 406 and accessories are third party tested and approved by ETL. <br />�' The Model 406 system is patent pending. <br />