Laserfiche WebLink
29. Wheelbarrows shall not be pushed with handles in an upright position. <br />30. Portable electric tools shall not be lifted or lowered by means of the power cord. <br />Ropes shall be used. <br />31. Electric cords shall not be exposed to damage from vehicles driving over them. <br />32. In locations where the use of a portable power tool is difficult, the tool shall be <br />supported by means of a rope or similar support of adequate strength. <br />33. Only authorized persons shall operate machinery or equipment. <br />34. Loose or frayed clothing, or long hair, dangling ties, finger rings, etc., shall not <br />be worn around moving machinery or other sources of entanglement. <br />35. Machinery shall not be serviced, repaired or adjusted while in operation <br />shall oiling of moving parts be attempted, except on equipment that is designed <br />or fitted with safeguards to protect the person performing the work. <br />36. Where appropriate, lock -out procedures shall be used. <br />37. Employees shall not work under vehicles supported by jacks or chain hoists, <br />without protective blocking that will prevent injury if jacks or hoists should fail. <br />38. Air hoses shall not be disconnected at compressors until hose line has been <br />39. All excavations shall be visually inspected before backfilling, to ensure that it is <br />safe to backfill. <br />40. Excavating equipment shall not be operated near tops of cuts, banks, and cliffs <br />if employees are working below. <br />