COMPLIANCE INFO_1997-2002 - Laserfiche WebLink

Home Browse Search

DMAYMMKIMW 3 1 ■ OPW 633T adaptors screw onto the fillpipe of underground storage tanks. Installation is easy with internal wrenching lugs. Designed for use with the OPW 634TT and 634TE and other similar top seal caps, the OPW 633T accepts top seal fill elbows. All 4" x 4" 633T and 633TE adaptors are now made with two 1/4" notches cut at opposite ends, into the base of the adaptor (below the threads). These notches are to accomodate the corresponding protrusions on the 633LC lock clamp. When the 633T or 633TE is used in conjunction with the 633LC. The adaptor can be locked on to the riser pipe preventing it from being loosened by a delivery elbow. OPW 633TE The OPW 633TE adaptor is similar to the 633T, except it does not have internal wrenching lugs. Ordering Specifications Product No. in. mm. lbs. kg. Description 633T-8050 3"x2" 160 0.54 .25 Hardcoated Al. 633T-8060 3"x3" 76x76 0.96 .44 Bronze 633T-8070 3"x4" 16x102 0.71 .32 Hardcoated Al. 633T-8075 44" 102x102 0.82 .37 Hardcoated Al. 633T-8076 44" 102x102 2.70 1.23 Bronze 633T-7985 44" 102x102 0.45 .20 Duratuff" II 633T-8080 43" 102x76 0.89 .40 Hardcoated A. 633TE-8160 3"x3" 76x76 0.94 .43 Bronze 633TE-8180 44" 102x102 0.79 .36 Hardcoated A. 633TE-7986 4"x4" 102x102 0.48 .22 Duratuff® II Replacement Parts Part No. Size Description H -05289-M 3" x 3" Gasket H -04150-M 3" x 4" Gasket H -04150-M 4" x 4" Gasket H -04145-M 4" x 3" Gasket H -11199-M 4" x 4" Gasket 633T-8076 1 Dimensions DPW 633T 3"x2" Thread 2" CLAMPLOCK 1 r G OPW 633LC lock clamp is designed to slip on to a riser pipe. The 633T or 633TE fill adaptor is then threaded on to the riser pipe. Next the lock clamp should be slid up the riser until the protrusions in the lock clamp line up with the notches in the adaptor. Once the adaptor and clamp are engaged the lock clamp can be tightened and the adaptor will be locked in place to create a vapor tight seal. Additionally the lock clamp can be turned upside down on the riser pipe to lock the riser into the base of all OPW spill contain- ers, which have notches in them similar to the 633T and 633TE adaptors. Using the lock clamp in this manor will lock the riser pipe into the spill container. Materials: Clamp: Stainless Steel Bolt: Zinc Plated Steel Set Screws: Stainless Steel Ordering Specifications Product No. in. mm. Description 633LC-1000 4" 102 Stainless Steel ate; OPW 633T TOP SEAL ADAPTOR RISER , / LOCK CLAMP PIPE BOLT & NUT SETSCREW LOCK CLAMP SPILL CONTAINER BASE n Ll In. mm. A 3 3%64 " 92 B 3 3% " 92 C DPW 633T 3"x 3" Thread 3" 1 41 in. mm. A 3% " 92 B 36%64 " 100 C DPW 633T 3"x4" Thread 4" I% 41 in. mm. A 3'%4" 92 B 5%4" 128 C DPW 633T 4"x3" Thread 3" 2IV16" 6 in. mm. A 4'%4" 123 B 45%64" 123 C DPW 633T 4"x4" Thread 4" 213/,6" 55 in. mm. A 455/141' 123 B 4'5/32" 121 C 2%2" 67 CLAMPLOCK 1 r G OPW 633LC lock clamp is designed to slip on to a riser pipe. The 633T or 633TE fill adaptor is then threaded on to the riser pipe. Next the lock clamp should be slid up the riser until the protrusions in the lock clamp line up with the notches in the adaptor. Once the adaptor and clamp are engaged the lock clamp can be tightened and the adaptor will be locked in place to create a vapor tight seal. Additionally the lock clamp can be turned upside down on the riser pipe to lock the riser into the base of all OPW spill contain- ers, which have notches in them similar to the 633T and 633TE adaptors. Using the lock clamp in this manor will lock the riser pipe into the spill container. Materials: Clamp: Stainless Steel Bolt: Zinc Plated Steel Set Screws: Stainless Steel Ordering Specifications Product No. in. mm. Description 633LC-1000 4" 102 Stainless Steel ate; OPW 633T TOP SEAL ADAPTOR RISER , / LOCK CLAMP PIPE BOLT & NUT SETSCREW LOCK CLAMP SPILL CONTAINER BASE n Ll