COMPLIANCE INFO_1985-2005 - Laserfiche WebLink

Home Browse Search

w 5 • t � � mac.'.. { r - :t '.Y•e. Yl 1M. joint which promotes fast, posi- tive make- up and pre- vents "back- out" problems during cure time. These features assist the installer and assure economical installation. ® Reliability - Smith Fiber- glass Products fiberglass pip- ing is designed and manufactured to meet the requirements of governmen- tal environmental regulations, in- cluding EPA. Fiberglass piping differs from other products which are designed for easy replacement in the event of failure. REFER TO BULLETIN B2150 for dimensions of available UL/ULC Listed RED THREAD IIA product and containment fittings. Easy, Economical Installation The exclusive T.A.B. joint is factory - installed on product piping. Spigots and bonded -on coupling ends are threaded with special profile double - lead threads. The standard joining procedure for field -made epoxy bonds is achieved by the mechanical locking action of matching bell and spigot tapered angles. Compatible adhesives from Smith Fiberglass Products are 0 OF 1F7 \ r 43 used to bond the piping system. Th - components needed to make a boric along with a detailed instruction shee- are included with each adhesive kit. When RED THREAD IIA produc pipe is cut to length on the jobsite the cut end must be retapered. tapering tool, available from Smiti- Fiberglass Products (Bulletin No F6600), quickly applies the prope- matching taper — similar to a penci sharpener. Plain, unthreaded field - made tapers can be joined wit ir factory -installed T.A.B. joint couplec ends. Either T.A.B. spigots or field - made tapers may be joined with bellec.' fittings. When connecting containment pipe and fittings, plain ends of the contain- ment pipe are machined or thoroughly sanded to accept the two-piece UL ULC Listed containment fitting. ,"I ing adhesives are used to bond the Svstem.