COMPLIANCE INFO_1985-2005 - Laserfiche WebLink

Home Browse Search

joint which .f promotes fast, posi- tive make- up and pre- vents "back- out" problems during cure time. These features assist the installer and assure economical installation. • Reliability - Smith Fiber- glass Products fiberglass pip- ing is designed and manufactured to meet the requirements of governmen- tal environmental regulations, in- cluding EPA. Fiberglass piping differs from other products which are 1?�a�}.iiJ'i�:_'{.�R"�'.::•:;+faSlC+ti.=a)��33�+"?e�C �=", :s-_�5iy�?� `;: -`": ��• `•! ' � ' dam. �, � S' ^' '' ^ �� y�..."°e �:"�,. .QCT .a .. - t •a'. •. ya _• I� ,s designed for easy replacement in the event of failure. REFER TO BULLETIN 82150 for dimensions of available UL/ULC Listed RED THREAD IIA product and containment fittings. Easy, Economical Installation The exclusive T.A.B. joint is factory - installed on product piping. Spigots and bonded -on coupling ends are threaded with special profile double - lead threads. The standard joining procedure for field -made epoxy bonds is achieved by the mechanical locking action of matching bell and spigot tapered angles. Compatible adhesives from Smith Fiberglass Products are used to bond the piping system. T�- components needed to make a bor. along with a detailed instruction she= are included with each adhesive kit. When RED THREAD IIA produ pipe is cut to length on the jobsit. the cut end must be retapered. tapering tool, available from Smit Fiberglass Products (Bulletin `c F6600), quickly applies the prope matching taper — similar to a pent sharpener. Plain, unthreaded fieic made tapers can be joined wit factory -installed T.R.B. joint couple ends. Either T.A.B. spigots or fielc made tapers may be joined with belle fittings. When connecting containment pips and fittings, plain ends of the contain ment pipe are machined or thoroughk sanded to accept the two-piece UL ULC Listed containment fitting. Match- ing adhesives are used to bond the system.