COMPLIANCE INFO_2006-2012 - Laserfiche WebLink

Home Browse Search

-SVvRCB,January 2002 Pae of J _ g 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer 0 Industry Standard X Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Caldwell Systems Equipment Resolution: .005/30 min Al AN hxYA ., pix „� �; ,.' ,,: ' Sump#1 Sump#,> S,ump_#,,. Sump#', Sump Diameter: 42" Sump Depth: 48" Sump Material: Fiberglass Height from Tank Top to Top of 26„ Highest Piping Penetration: Height from Tank Top to Lowest Electrical Penetration: 32 Condition of sump prior to testing: Dry Portion of Sump Tested' 2"above Highest piping penetration Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑No x NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?' Turbine shutdown response time Is system programmed for fail-safe ❑yes ❑No x NA ❑Yes ❑No [INA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA shutdown? Was fail-safe verified to be o as fail-ionasafe ❑Yes ❑No x NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Wait time between applying pressure/vacuam/water and starting 5 min 5 min 5 min 5 min test: Test Start Time: 8:55 Initial Reading(RI): .00" .00" .00" .00" Test End Time: 9:25 Final Reading(RF): .00 Test Duration: 30 min 30 min 30 min 30 min Change in Reading(RF-RI): .00 Pass/Fail Threshold or Criteria: .005/30 min .005/30 min .005/30 min .005/30 min Test Result: x Pass ❑Fall ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fait Was sensor removed for testing? x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and x Yes ❑No ❑NA x Yes ❑No ❑NA x Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testin ? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)