COMPLIANCE INFO_2006-2012 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 ..1,. / I I I>. 1 10 Page of Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard X Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic ❑ Other (Spec) Test Equipment Used: Caldwell Systems Equipment Resolution: .005/30 min Sump # 1 Sump Sump # Sump # Sump Diameter: 42" Sump Depth: 50" Sump Material: Fiberglass Height from Tank Top to Top of Highest Piping Penetration: 24„ Height from Tank Top to Lowest 33„ Electrical Penetration: Condition of sump prior to testing: Dry Portion of Sump Tested' 2" above Highest piping penetration Does turbine shut down when sump sensor detects liquid (both x Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA roduct and water)?* Turbine shutdown response time Is system programmed for fail-safe shutdown?' x Yes ❑ No ElNA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA Was fail-safe verified to be o erational?' ❑Yes x No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ElNo ElNA ❑Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and starting 5 min 5 min 5 min 5 min test: Test Start Time: 9:20 Initial Reading (RI): .00" .00" .00" .00" Test End Time: 9:50 Final Reading (RF): .00 Test Duration: 30 min 30 min 30 min 30 min Change in Reading (RF -RI): .00 Pass/Fail Threshold or Criteria: .005/30 min .005/30 min .005/30 min .005/30 min Test Result: x Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? ❑ Yes x No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? x Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)