Laserfiche WebLink
• rad rr♦rvV V �. v r✓. v✓ �.... ® WJV M`�/ NVw <br /> a <br /> STEP I Identify the damaged boot and select the proper Blueline Repair <br /> Boot based upon the number of studs and the pipe OD.(See 2006 <br /> Catalog,Section 10 and Appendix 1) <br /> STEP 2 Remove baud clamps from old fitting.Remove the nuts from the <br /> stubs and store for future use.Remove old fitting.The old fitting <br /> will need to be cut off. Take care not to damage the secondary <br /> pipe. �. <br /> STEP 3 Install all Pellethaue split components Otho the pipe carefully.All <br /> Pellethane pieces must be rebonded back together with Blue Seal <br /> Glue.This is done by ensuring that the surfaces are clean and dry. <br /> Apply a liberal bead of Blue Seal and hold the scam closed <br /> securely until it is fused.It's helpful to use the clamps to loosely <br /> hold the boot closed during curing. Bonded connections should F. <br /> bold themselves closed within five minutes if there arc no stresses <br /> on them.The Blue Seal glut will be fully cured in 40 minutes. <br /> "Ii-components-are-bonded;-apply-.rii <br /> Parasealant 626, or Bwilk 1100FS to the underside of the sea]. ua <br /> This will crake the seal with the sump wall.Insert poly ring into <br /> the gasket and position it auto the studs and tip against the sump <br /> wall. a <br /> t.. <br /> --- <br /> STEI'3—__--_) eiustall nuts and tighten them in a star pattern. <br /> a <br /> e � <br /> 1; •d s1rE�-ztfs-soa dst :Ea 90 to oaa <br />