COMPLIANCE INFO_1997-2006 - Laserfiche WebLink

Home Browse Search

TwgN/CNfA608D�- NOE r-6AjkMONITORING SYSTEM CERTIFICATION se By All Jurisdictions Within the State of Califom Authority Cited: Chapter 6.7, HWIth and Safety Code; Chapter 16, Division 3 Title 23, lifomia Code of Regulations This form must be used to document testing and servicing of monitoring equipment. If more than one monitoring system control panel is installed at the facility, a separate certification or report must be prepared for each monitoring system control panel by the technician who performs the work. A copy of this form must be provided to the tank system owner/operator. The owner/operator must submit a copy of this form to the local agency regulating UST systems within 30 days of test date. A. General Information Facility Name: CHEVRON #99840 Site Address: 4344 WATERLOO RD Facility Contact Person: MANAGER Make/Model of Monitoring System: TLS -350 B. Inventory of Equipment Tested/Certified City: STOCKTON Contact Phone No: 931-2186 Date of Testing/Service: 03/16/2004 Work Order Number: 2230339 Check the appropriate boxes to indicate specific equipment inspected/serviced CA Zip: 95210 Tank ID: 1-91 Tank ID: 2-87 7 In -Tank Gauging Probe. Model: MAG X In -Tank Gauging Probe. Model: MAG X Annular Space or Vault Sensor. Model: 409 FX1 Annular Space or Vault Sensor. Model: 409 X Piping Sumprrrench Sensor(s). Model: 352 171 Piping Sump/Trench Sensor(s). Model: 352 Fill Sump Sensor(s). Model: Ej Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: El Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: PLLD X Electronic Line Leak Detector. Model: PLLD Tank Overfill/High-Level Sensor. Model: El Tank Overfill/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). Other (specify equipment type and model in Section E on page 2). Tank ID: Tank ID: In -Tank Gauging Probe. Model: In -Tank Gauging Probe. Model: Annular Space or Vault Sensor. Model: Annular Space or Vault Sensor. Model: Piping Sump/Trench Sensor(s). Model: Piping Sump/Trench Sensor(s). Model: Fill Sump Sensor(s). Model: Fill Sump Sensor(s). Model: Mechanical Line Leak Detector. Model: Mechanical Line Leak Detector. Model: Electronic Line Leak Detector. Model: Electronic Line Leak Detector. Model: Tank Overfill/High-Level Sensor. Model: Tank Overfill/High-Level Sensor. Model: Other (specify equipment type and model in Section E on page 2). Other (specify equipment type and model in Section E on page 2). Dispenser : 1/2 Dispenser ID: 3/4 X❑ Dispenser Containment Sensor(s) Model: 208 -Dispenser Containment Sensor(s) JAI Model: 208 ® Shear Valve(s). X Shear Valve(s) ElDispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). Dispenser ID: 5/6 Dispenser ID: 7/8 QDispenser Containment Sensor(s) Model: 208 Dispenser Containment Sensor(s). Model: 208 XO Shear Valve(s). Shear Valve(s). 11 Dispenser Containment Float(s) and Chain(s). Ej Dispenser Containment Float(s) and Chain(s). Dispenser ID: 9/10 Dispenser ID: 11/12 ❑X Dispenser Containment Sensor(s) Model: 208 X Dispenser Containment Sensor(s). Model: 208 QX Shear Valve(s). )( Shear Valve(s). ® Dispenser Containment Float(s) and Chain(s). Dispenser Containment Float(s) and Chain(s). * If the facility contains more tanks or dispensers, copy this form. Include information for every tank and dispenser at the facility. C. Certification I certify that the equipment identified in this document was inspected/serviced in accordance with the manufacturers' guidelines. Attached to this certification is information (e.g manufacturers' checklists) necessary to verify that this information is correct. and a Site Plan showing the layout of monitoring equipment. For any equipment capable of generating such reports, I have also attached a copy of the (Check all that apply): System set-up report; ❑ Alarm history report[R] el PRINTED NAME:DOUGLAS HARTY SIGNATURE: COMPANY: Tanknology PHONE NO: (800) 800-4633 page 1 of 3 Based on CA form dated 03/01