Laserfiche WebLink
D.Results of Testing/Servicing <br /> Software Version Installed: 122.00 <br /> Complete the following checklist: <br /> -7-777 <br /> �' Yes No* Is the audible alarm operational? <br /> F Yes F No* Is the visual alarm operational? <br /> _ _ __ �- <br /> Yes No* Were all sensors visually inspected,functionally tested,and confirmed operational? � <br /> F' Yes FNo* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment <br /> will not interfere with their <br /> MOOMMOOMMOM <br /> o r o eration? <br /> Yes F No* If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem) <br /> N/A operational? <br /> F Yes r No* For pressurized piping systems,does the turbine automatically shut down if the piping secondary <br /> N/A containment monitoring system detects a leak,fails to operate,or is electrically disconnected?If yes:7which <br /> sensors initiate positive shut-down?(Check all that apply) <br /> Sump/TrenchSensors; Dispenser Containment Sensors. Did you confirm positive shut-d <br /> due to I eaks and sensor failure/disconnection? <br /> L F Yes; No. —] <br /> _ <br /> Yes F N o* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i a no <br /> mechanical overfill prevention valve is installed),is the overfill warning alarm visible and audible at the <br /> N/A tank fill point(s)and operating properly?If so,at what percent of tank capacity ndoes the alarm trigger? <br /> EFes*_ Fv HNo Was any monitoring equipment replaced?If yes,identify specific sensors,probes,or other equipment <br /> _ replaced and list the manufacturer name and model for all replacement parts in Section E,below. <br /> L_� Yes* F' No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that <br /> apply) r Product; r— Water.If yes,describe causes in Section E,below. <br /> ffvye:s:: rFNo* Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> Yes F No* Is all monitoring equipment operational per manufacturer's specifications? � � <br /> *In Section E below,describe how and when these deficiencies were or will be corrected <br /> E. Comments: <br /> Cl Belly Tank Annular: 794380-344/Certified. <br /> No other sensors were certified at this time. <br />