COMPLIANCE INFO_2010-2012 - Laserfiche WebLink

Home Browse Search

11 SWRCB, January 2002 Page 5 of 5 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed by ❑ Sump Manufacturer N Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used ❑ Pressure ❑ Vacuum N Hydrostatic ❑ Other (Specify) Test Equipment Used: Incon TS -STS Equipment Resolution:.0006 Fill Sump # Fill Fill Sump # Middle Fill Sump # Fill Sump # UE042U001 �UE0421J001 Sump Diameter: 38" 38" Sump Depth: 40.5" 41" Height from Tank Top to Top of Highest Piping Penetration: 10" N/A Height from Tank Top to Lowest Electrical Penetration: 8" 14" Condition of sump prior to testing: Good Good Portion of Sump Tested: 2" above pen 2" above Collar Sump Material: Fiberglass Fiberglass Wait time between applying pressure/vacuum/water and starting test: 15 min 15 min Test Start Time: 12:02 pin 12:18 pin 12:02 pm 12:18 pm Initial Reading Ri): 2.2099 2.2100 1.3296 1.3291 Test End Time: 12:17 pm 12:33 pm 12:17 pra 12:33 pm Final Reading (Rf): 2.2099 2.2099 1.3291 1.3286 Test Duration: 15 min 15 min 15 min 15 min Change in Reading Rf-Ri : .0000 .0001 .0005 .0005 Pass/Fail Threshold or Criteria: .002 .002 Test Result: N Pass ❑ Fail N Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Is there a sensor in the sump? N Yes ❑ No N Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No Does the sensor alarm when either product or water is detected? ❑ Yes N No ❑ NA ❑ Yes N No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor removed for testing? N Yes ❑ No ❑ NA N Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? ❑ Yes N No ❑ NA ❑ Yes N No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Comments include any information on repairs made prior to testing,and recommended follow-up for failed tests The sensors were reinstalled to lowest point, but not tested.