COMPLIANCE INFO_2010-2012 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 Page 3 of 3 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed by ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Specify) Test Method Used ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Specify) Test Equipment Used: Incon TS -STS Equipment Resolution:.0006 Fill Sump # Fill Fill Sump # Fill Sump # Fill Sump # UE042U001 Sump Diameter: 38" Sump Depth: 40.5" Height from Tank Top to Top of Highest Piping Penetration: 10" Height from Tank Top to Lowest Electrical Penetration: 8" Condition of sump prior to testing: Good Portion of Sump Tested: 2" Above High. Pen. Sump Material: Fiberglass Wait time between applying pressure/vacuum/water and starting test: 15 min Test Start Time: 9:07 AM 9:23 AM Initial Reading Ri): 2.9245 2.9235 Test End Time: 9:22 AM 9:38 AM Final Reading (Rf): 2.9235 2.9229 Test Duration: 15 min 15 min Change in Reading Rf-Ri : .0010 .0006 Pass/Fail Threshold or Criteria: .002 Test Result: ® Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Is there a sensor in the sump? ® Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No Does the sensor alarm when either product or water is detected? ❑ Yes ® No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor removed for testing? ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? ❑ Yes ® No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Comments include any information on repairs made prior to testing,and recommended follow-up for failed tests Sensor reinstalled to lowest point, but not tested.