COMPLIANCE INFO_2013-2018 - Laserfiche WebLink

Home Browse Search

RECEIVED AUG 2 3 201 SWRCB,January 2002 8. FILL RISER CONTAINMENT SUMP TESTING ENVIRONMENTAL Facility is Not Equipped With Fill Riser Containment Sumps ❑ HEALTH Q EPARTME Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑Sump Manufacturer Q Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum 0 Hydrostatic ❑Other(Spec) Test Equipment Used: Incon ST-STS Equipment Resolution: .0006 Fill Sump UE040001 Center UE040001 Sump Diameter: 38" 38" Sump Depth: 40" 40" Height from Tank Top to Top of 10" N/A Highest Piping Penetration: Height from Tank Top to Lowest 8" 8" Electrical Penetration: Condition of sump prior to Good Good testing: Portion of Sump Tested 2"above piping 2"above collar Sump Material: Fiberglass Fiberglass Wait time between applying pressure/vacuum/water and Visual failure 15 min starting test: Test Start Time: 9:37am 9:54am Initial Reading(RI): 3.4054 3.4050 Test End Time: 9:52am 10:09am Final Reading(RF): 3.4051 3.4049 Test Duration: 15 min 15 min Change in Reading(RF-RI): .0003 .0001 Pass/Fail Threshold or Criteria: .002 .002 Test Result: ❑Pass ❑X Fail ❑X Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Is there a sensor in the sump? ❑X Yes ❑No ❑X Yes ❑No ❑Yes ❑No ❑Yes ❑No Does the sensor alarm when ❑Yes [Z]No ❑NA either product or water is ❑Yes❑X No❑NA ❑Yes❑No❑NA ❑Yes❑No❑NA detected? Was sensor removed for testing? [::]Yes [E]No ❑NA ®Yes❑No❑NA ❑Yes❑No❑NA ❑Yes❑No❑NA Was sensor properly replaced and ❑Yes EK:]No ❑NA verified functional after testing? ❑Yes❑No 0NA ❑Yes : No INA ❑Yes❑No❑NA Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) Sensor was removed for testing and reinstalled to the lowest point, but not tested.