COMPLIANCE INFO_2013-2018 - Laserfiche WebLink

Home Browse Search

RECEIVED SWRCB,January 2002 AUG 2 3 201 6. PIPING SUMP TESTING ENVIRONMENIAI Test Method Developed By: ❑Sump Manufacturer ®Industry Standard ❑ProldfiftTHEDOWTMENT ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum ❑X Hydrostatic ❑Other(Spec) Test Equipment Used: Incon TS-STS Equipment Resolution: .0006 Piping UE0420001 Sump Diameter: 38" Sump Depth: 41" Sump Material: Fiberglass Height from Tank Top to Top of 15" Highest Piping Penetration: Height from Tank Top to Lowest 10" Electrical Penetration: Condition of sump prior to testing: Good Portion of Sump Tested' 2"above piping❑No ONA Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑Yes❑No DNA ❑Yes❑No DNA ❑Yes❑No❑NA product and water)?* Turbine shutdown response time N/A Is system programmed for fail-safe ❑Yes ❑No ❑X NA ❑Yes❑No DNA ❑Yes❑No ❑NA ❑Yes[--]No DNA shutdown? Was fail-safe verified to be ❑Yes ❑No ❑X NA ❑Yes❑No DNA ❑Yes❑No DNA ❑Yes❑No❑NA operational? Wait time between applying pressure/vacuum/water and starting 15 min. test: Test Start Time: 9:37am 9:54am Initial Reading(Ri): 3.0815 3.0789 Test End Time: 9:52am 10:09 Final Reading(RF): 3.0802 3.0781 Test Duration: 15 min 15 min Change in Reading(RF-RI): .0013 .0008 Pass/Fail Threshold or Criteria: .002 1.002 Test Result: ❑X Pass ❑Fail ❑ Pass ❑Fail ❑Pass ❑Fail ❑Pass ❑Fail Was sensor removed for testing? [E]Yes ❑No DNA ❑Yes[—]No DNA ❑Yes❑No DNA ❑Yes❑No DNA Was sensor properly replaced and ❑Yes 0No DNA verified functional after testing? Dyes[—]No DNA ❑Yes❑No DNA ❑Yes❑No DNA Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) Sensors was removed for testing and reinstalled to the lowest point, but not tested. ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to as of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)