Laserfiche WebLink
0 <br />5. SECONDARY PIPE TESTING <br />Test Method Developed By: ®Piping Manufacturer ® Industry Standard ❑Professional Engineer <br />❑ Other (Specify) <br />Test Method Uses: ® Pressure ❑ Vacuum <br />❑ Other (Specify) <br />Measuring Equipment Used for Testing: Digital manometer <br />Piping Run #SUPPLY Piping Run #SUPPLY <br />PLASTIC <br />❑ Hydrostatic <br />Piping Run # <br />Piping Material:; PLASTIC <br />Piping Manufacturer: WESTERN <br />Piping Diameter: <br />Length of Piping Run: 30' <br />Product Stored: DIESEL <br />Method and location of TEST BOOT <br />pipin -run isolation: <br />Wait time between applying <br />pressure/vacuum/water and 15 MINUTES <br />starting test: <br />Test Start Time: 10:40 <br />Initial Reading (RO: 5 PSI <br />Test End Time: 11:40 <br />Final Reading (RF): 5 PSI <br />Test Duration: 1 HOUR <br />Change in Reading (RF-Ri): 0 <br />Pass/Fail Threshold: 0 <br />Test Result. M PASS <br />Comments — (include information on repairs made to <br />ermit was obtained or the repairs) <br />WESTERN <br />30' <br />DIESEL <br />TEST BOOT <br />15 MINUTES <br />10:40 <br />5 PSI <br />11:40 <br />5 PSI <br />1 HOUR <br />0 <br />0 <br />PASS <br />facilitate a passing test and indicate whether a <br />Note: Pressure testing of piping secondary containment systems should be performed at 5 PSI, <br />which is generally consistent with testing performed at time of installation. <br />R.C.U.S.T.COM <br />