COMPLIANCE INFO_2007-2012 - Laserfiche WebLink

Home Browse Search

6. SUBMERSIBLE PUMP C NTAINMENT SUMP TESTING (SU Standard Test Method Developed By: [I Sump Manufacturer ® Industry ❑ Other (Specify) Test Method Uses: ❑ Pressure ❑ Vacuum ❑ Other (Specify) Measuring Equipment Used for Testing:Tempsonic Sump # testing? Comments — (include information on repairs made to facilitate a passing test and indicate whether a ermit was obtained or the repairs) Note: Hydrostatic testing of sumps should, at a minimum, provide for a liquid level that tests the tank/saddle juncture and the highest tank piping system projection into the sump. R.C.U.S.T.COM Sump # Sump Diameter: 30" Sump Depth: 52" Sump Material: FIBERGLASS Height from Tank Top to Highest 17" Piping Penetration: Height from Tank Top to Lowest 17" Electrical Penetration: Condition of sump prior to testing: CLEAN Portion of Sump Tested. ABOVE PENETRATION Does turbine shut down when sensor detects either product N/A sump or water? Turbine shutdown response time. N/A Is system programmed for fail-safe N/A shutdown? Was fail-safe verified to be N/A o erational? Wait time between applying and starting 15 MINUTES pressure/vacuum/water test: Test Start Time: 9:38 9:55 Initial Reading (R�): 2.166 2.167 Test End Time: 9:53 10:10 Final Reading (RF): 2.167 2.168 Test Duration: 15 MIN 15 MIN Change in Reading (RF-Rl): .001 Pass/Fail Threshold: .002 Test Result: PASS Was sensor remov�forMdafte�r S Was sensor properS Sump # testing? Comments — (include information on repairs made to facilitate a passing test and indicate whether a ermit was obtained or the repairs) Note: Hydrostatic testing of sumps should, at a minimum, provide for a liquid level that tests the tank/saddle juncture and the highest tank piping system projection into the sump. R.C.U.S.T.COM