COMPLIANCE INFO_1998-2004 - Laserfiche WebLink

Home Browse Search

UCSB04N-2611194 Page 3 of 3 5. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer N Industry Standard ❑ Professional Engineer ❑ Other(Specify) Test Method Used: ❑ Pressure ❑Vacuum N Hydrostatic ❑ Other(Specify) Test Equipment Used: INCON TS-STS TEST UNIT Equipment Resolution: SPEENSIM Sump#87 Sump#91 Sump# Sump# Sump Diameter: 48" 48" Sump Depth: 44" 34.5" Sump Material: FIBERGLASS FIBERGLASS Height from Tank Top to Top of 18" 18" Highest Piping Penetration: Height from Tank Top to Lowest 30" 28" Electrical Penetration: Condition of sump prior to testing: GOOD GOOD 2"ABOVE HIGHEST 2"ABOVE HIGHEST Portion of Sump Tested PIPING PENETRATION PIPING PENETRATION Does turbine shut down when sump sensor detects liquid(both N Yes ❑No ❑NA N Yes ❑No DNA ❑Yes ❑No [INA ❑Yes ❑No ❑NA product and water)? Turbine shutdown response time NA NA Is system programmed for fail-safe N Yes ❑No ❑NA N Yes ❑No ❑NA ❑Yes ❑No DNA ❑Yes ❑No ❑NA shutdown?* Was fail-safe verified to be ❑Yes NNo ❑NA ❑Yes NNo ❑NA ❑Yes ❑No DNA ❑Yes ❑No ❑NA op erational?* Wait time between applying pressure/vacuum/water and starting 15 MINUTES 15 MINUTES test: Test Start Time: 11:04 11:20 11:04 11:20 Initial Reading(Rj): 4.278 4.278 6.115 6.115 Test End Time: 11:19 11:36 11:19 11:36 Final Reading(RF): 4.278 4.278 6.115 6.114 Test Duration: 15 MIN 15 MIN 15 MIN 15 MIN Change in Reading(RF-RI): 0.000 0.000 0.000 -0.001 Pass/Fail Threshold or Criteria: -0.002 -0.002 -0.002 -0.002 Test Result. N Pass ❑Fail N Pass ❑Fail ❑ Pass ❑Fail ❑ Pass, ❑Fail Was sensor removed for testing? N Yes ❑No ❑NA N Yes ❑No ❑NA p Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and N yes ❑No ❑NA N Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testing? Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests)