Laserfiche WebLink
SWRCB,January 2002 Page C of <br /> 8. FHL RISER CONTAINAIENT SUMIP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps X <br /> Fill Riser Containment Sumps are Present,but were Not Tested 0 <br /> Test Method Developed By: 0 Sump Manufacturer 0 Industry Standard Professional Engineer <br /> 0 Other(Specify) <br /> Test Method Used: 0 Pressure 0 Vacuum Hydrostatic <br /> 0 Other(Specify) <br /> Test Equipment Used:Caldwell Level Change Indicator Equipment Resolution: .002 <br /> EMEl Fill Sump# Fill Sump# Fill Sump# Fill Sump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Hi est Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> water and starting test: <br /> Test Start Time; <br /> Initial Reading(RI): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Chane in Reading(RF-Rj: <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: Pass 0 Fail Pass 0 Fail Pass 0 Fail 0 Pass 0 Fall <br /> Is there a sensor in the sump? Yes 0 No Yes 0 No Yes 0 No 0 Yes 0 No <br /> Does the sensor alarm when <br /> either product or water is Yes 0 No DNA Yes 0 No 0 NA Yes 0 No 0 NA 0 Yes 0 No 0 NA <br /> detected? <br /> Was sensor removed for testing?. Yes 0 No 0 NA Yes 0 No 0 NA Yes 0 No DNA 0 Yes 0 No 0 NA <br /> g? <br /> Was sensor properly replaced and <br /> t ac Yes 0 No 0 NA Yes El No 0 NA Yes 0 No DNA 11 Yes El No 11 NA <br /> verified functional afteres <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />