Laserfiche WebLink
t <br />t <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />DoubleTra lexible Double Containment Pi <br />SECTION 7.0 - ASSEMBLY OF DoubleTrac® BF <br />FITTING <br />Tools required for Assembly <br />Utility Knife with sharp blade <br />Appropriate size allen wrench <br />Tubing Cutter <br />1. Components <br />i <br />2. To determine the rough jacket strip length measure <br />back 3" from the end. <br />3. Using the tubing cutter, score the black sleeve <br />approximately half of the way through all around the <br />sleeve circumference. Use extreme caution not to cut or <br />score the stainless corrugated pipe. Typically, no more <br />than two turns on the cutter is sufficient. <br />4. Finish cutting through the outer jacket down to the <br />stainless corrugated pipe using a sharp utility knife. <br />5. Carefully cut jacket with a utility knife for ease of <br />removal. Do not score DoubleTrac° piping. <br />ENVIRONMENTAL HEALTH <br />Page 4 DEpARTMENT <br />