COMPLIANCE INFO_2017-2018 - Laserfiche WebLink

Home Browse Search

6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer N Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum N Hydrostatic ❑Other(Specify) Test Equipment Used: ancon TS-STs sump Test system Equipment Resolution: +/-0.002" Diesel/Piping Sump Diameter: 7 4211 Sump Depth: 43.5" Sump Material: Fiberglass Height from Tank Top to Top of 2l„ Highest Piping Penetration: Height from Tank Top to Lowest 13" Electrical Penetration: Condition of sump prior to testing: Good Portion of Sump Tested' 4" Above Pen. Does turbine shut down when I sump sensor detects liquid(both ❑Yes❑No N NA ❑Yes❑No N NA ❑Yes❑No N NA ❑Yes❑No N NA product and water)?` Turbine shutdown response time N/A Is system programmed for fail-safe shutdown? ❑Yes❑No N NA ❑Yes❑No N NA ❑Yes❑No N NA ❑Yes❑No N NA Was fail-safe verified to be ❑Yes❑No N NA ❑ ® Yes❑No ®NA ❑Yes❑ No NA ❑ Yes❑No ®NA operational?* , Wait time between applying j pressure/vacuum/water and starting 30 minutes j test: l Test Start Time: 08:34 AM 1 Initial Reading(R& 4.0302 Test End Time: 08:49 AM Aai .w` Final Reading(Rr): 3.8309 Test Duration: 15 min. Change in Reading(RF-R): -0.1993 Pass/Fail Threshold or Criteria: +/-0.002" e A s a, qT Test Result: Fail Was sensor removed for testing? Yes Was sensor properly replaced and Yes verified functional after testing? i Comments—(include information on repairs made prior to testing, and reconu»endecifolloiv-erp for failed tests) ' Sensor functionality was not confirmed.This procedure is not part of the Secondary Containment Testing scope of work. i I ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to M of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)