COMPLIANCE INFO_2004-2015 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 Page of 4. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sums ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard X Professional Engineer ❑ Other (Specify) Test Method Used: ❑ Pressure ❑ Other (Spec) ❑ Vacuum X Hydrostatic Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 Fill Sump # 1-87 Fill Sump # 2-91 Fell Sump#3-Diesel Fill Sump # Sump Diameter: 42" 42" 42" Sump Depth: 48''/2" 51 %" 52" Height from Tank Top to Top of Highest Piping Penetration: 11" 34" 29" Height from Tank Top to Lowest Electrical Penetration: 16" 13" 18" Condition of sump prior to testing: Dry Dry Dry Portion of Sump Tested Water Level 18" Water Level 36" Water Level 31" Sump Material: Fiberglass Fiberglass Fiberglass Wait time between applying water and starting test: 5 Minutes 5 Minutes 5 Minutes Test Start Time: 9:10 10:00 10:50 Initial Reading (Ri): .001 .001 .001 Test End Time. 9:40 10:30 11:20 Final Reading (RF): .001 .001 .001 Test Duration: 30 Minutes 30 Minutes 30 Minutes Change in Reading (RF-RI): 0 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes .005/30 Minutes Test Result: X Pass ❑ Fail X Pass ❑ Fail X Pass ❑ Fail ❑ Pass ❑Fail Is there a sensor in the sump? X Yes ❑ No X Yes ❑ No X Yes C7 No ❑ Yes ❑ No Does the sensor alarm when either product or water is detected? X Yes ❑ No [INA X Yes []No [INA X Yes ❑ No ❑ NA ❑ Yes F_� No ❑ NA Was sensor removed for testing? X Yes ❑ No ❑ NA X Yes ❑ No Cl NA X Yes ❑ No ❑ NA ❑ Yes Cl No ❑ NA Was sensor properly replaced and X Yes El No 11 NA X Yes 11 No Ll NA X Yes ❑ No 11 NA Ll Yes ❑ No LlNA verified functional after testin ? Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests)