COMPLIANCE INFO_2011-2015 - Laserfiche WebLink

Home Browse Search

Page 7 of 9 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ®Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic ❑Other(Spec) Test Equipment Used: See attached testing procedures Equipment Resolution: Fill Sump#87 Fill Sump#89 Fill Sump#91 Fill Sump# Sump Diameter: 48" 48" 48" Sump Depth: 72" 72" 73" Height from Tank Top to Top of 12" 13" 12" Highest Piping Penetration: Height from Tank Top to Lowest 35" 34" 35" Electrical Penetration: Condition of sump prior to Fair Fair Fair testing: Portion of Sump Tested Above highest Above highest Above highest Above highest penetration penetration penetration penetration Sump Material&Manufacturer: Fiberglass Fiberglass Fiberglass Wait time between applying pressure/vacuum/water and 30 minutes 30 minutes 30 minutes 30 minutes starting test: Test Start Time: 11:00am 11:00am 11:00am Initial Reading(Rj): 0.6888 0.6377 3.2060 Test End Time: 11:15am 11:15am 11:15am Final Reading(RF): 0.6889 0.6376 3.2063 Test Duration: 15 min 15 min 15 min 15 min Change in Reading(RF-RI): 0.00011 0.00009 0.00032 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 MOMMEJUMM Is there a sensor in the sump? ®Yes ❑No Yes ❑No ®Yes ❑No ®Yes No Does the sensor alarm when either product or water is ❑Yes ❑No ®NA []Yes❑No ®NA ❑Yes❑No ®NA ❑Yes❑No ®NA detected? Was sensor removed for testing? ®Yes No ❑ ®Yes El No ❑ ®Yes ❑No ❑NA ®Yes El No❑NA NA NA Was sensor properly replaced and ®I, s ❑No [-]NA ®Yes [:]No❑NA ®Yes ❑No❑NA ®Yes ❑No❑NA verified functional after test Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests)