COMPLIANCE INFO_2011-2015 - Laserfiche WebLink

Home Browse Search

a Y � Page 6 of 9 7. UNDER-DISPENSER CONTAINMENT C TESTING Test Method Developed By: ❑UDC Manufacturer ®Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑vacuum ®Hydrostatic ❑Other(Spec) Test Equipment Used: See attached testing,procedures. Equipment Resolution: UDC#9/10 UDC#11/12 UDC# UDC# UDC Manufacturer: UDC Material: Fiber lass Fiberglass UDC Depth: 30" 30" Height from UDC Bottom to Top 9" 9" of Hi hest Piping Penetration: Height from UDC Bottom to 5" 5" Lowest Electrical Penetration: Condition of UDC prior to Fair Fair testing: Portion of UDC Tested Above highest Above highest Above highest Above highest penetration penetration penetration penetration Does turbine shut down when UDC sensor detects liquid(both ❑Yes ❑No®NA ❑Yes❑No®NA ❑Yes ❑No®NA ❑Yes ❑No®NA product and water)?* Turbine shutdown response time Is system programmed for fail- ® ® ® ❑ ® ® ❑No® ❑ safe shutdown?* ❑Yes No NA Yes No NA Yes NA Yes No NA Was fail-safe verified to be ❑Yes ❑No®NA []Yes❑No®NA ❑Yes ❑No®NA ❑Yes ❑No®NA OP erational?* Wait time between applying pressure/vacuum/water and 30 minutes 30 minutes 30 minutes 30 minutes starting test Test Start Time: 12:41pm 12:41pm Initial Reading(Ri): 0.0632 0.2511 Test End Time: 12:56pm 12:56pm Final Reading(RF): 0.0638 0.2511 Test Duration: 15 min 15 min 15 min 15 min Change in Reading(RF-Ri): 0.00063 0 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 MEMEMEM Was sensor removed for testing? ®Yes[:]No❑NA ®Yes[-]No❑NA ®Yes❑No❑NA ®Yes[-]No❑NA Was sensor properly replaced and verified functional after testing? ®Yes[:]NoF1NA ®Yes[:]No❑NA ®Yes❑No❑NA ®Yes[:]No❑NA Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) i If the entire depth of the UDC is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)