COMPLIANCE INFO_2015-2016 - Laserfiche WebLink

Home Browse Search

8. FILL RISER CONTAINMENT SUMP TESTING � � 3 Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present,but were Not Tested ❑ Test Method Developed By: ❑Sump Manufacturer m Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum [Z]Hydrostatic ❑Other(Spec) Test Equipment Used: See attached testing procedures Equipment Resolution: Inches Fill Sump# 87 Fill Sump#91 Fill Sump# Diesel Fill Sump# 7Height 7Topto 48" 48" 48" Depth: 72" 73" 73" f 14" 14" 14" st Electrical Penetration: 33" 35" 36° Condition of sump prior to Fair Fair Fair Fair testing: Portion of Sump Tested Above highest penetration Above highest penetration Above highest penetration Above highest penetration Sump Material: Wait time between applying pressure/vacuum/water and 15 minutes 15 minutes 15 minutes 15 minutes starting test: Test Start Time: 10:09am 9:49am 9:54am Initial Reading(Ri): 4.6907 Inches 3.52966 Inches 4.98819 Inches Inches Test End Time: 10:24am 10:04am 10:09am Final Reading(RF): 4.6907 Inches 3.52996 Inches 4.98849 Inches Inches Test Duration: 15 minutes 15 minutes 15 minutes 15 minutes Change in Reading(RF-RI): 0.0000 0.00030 0.00030 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Test Result: p Pass ❑Fail p Pass ❑Fail p Pass ❑Fail ❑ Pass ❑Fail Is there a sensor in the sump? ®Yes ❑No 0 Yes ❑No 0 Yes ❑No ®Yes ❑No Does the sensor alarm when either product or water is 21 Yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA p Yes ❑No ❑NA detected? Was sensor removed for testing? ®Yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA Z Yes ❑No ❑NA Was sensor properly replaced and ©Yes ❑No ❑NA ®Yes ❑No ❑NA 0 Yes ❑No ❑NA p Yes ❑No ❑NA verified functional after testin ? Comments—(include information on repairs made prior to testing,and recommended follow-up for failed tests)