COMPLIANCE INFO_2007-2015 - Laserfiche WebLink

Home Browse Search

Page 3 of 8 0/r 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer Oindustry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum QHydrostatic ❑Other(Specify) Test Equipment Used: Caldwell Equipment Resolution: 0.0025 Sump 87 Sump Sump Sump Sump Diameter: 42" Sump Depth: 46" Sump Material: FG Height from Tank Top to Top of 21" Highest Piping Penetration: Height from Tank Top to Lowest 14" Electrical Penetration: Condition of sump prior to testing: Dry Portion of Sump Tested' 2"over product penetration Does turbine shut down when sump sensor detects liquid(both product and O Yes ® No 0 NA O Yes O No ❑NA O Yes O No 13 NA O Yes 0 No O NA -water)?* Turbine shutdown response time — Is system programmed for fail-safe ❑Yes ® No 121 NA 0 Yes ® No 0 NA 0 Yes O No O NA ®Yes O No O NA shutdown? Was fail-safe verified to be ❑Yes 0 No 0 NA ❑Yes 13 No O NA O Yes O No ❑ NA O Yes O No ❑ NA operational?* Wait time between applying pressure/vacuum/water and starting — test: Test Start Time: 9:55 Initial Reading(Ri): 0.0025 Test End Time: 10:55 Final Reading(RF): 0.0025 Test Duration: 30 min Change in Reading(RF-Ri): 0 Pass/Fail Threshold or Criteria: 1/16" in an hour Test Result: " 0 Pass ❑ Fail ❑ Pass ❑Fail ❑ Pass 0'Fail ❑ Pass ❑Fail Was sensor removed for testing? 21 Yes 0 No ®NA ❑Yes ❑No O NA O Yes O No ❑ NA ®Yes O No O NA Was sensor properly replaced after Yes O No ❑NA O Yes 0 No ®NA O Yes O No O NA ®Yes ❑No O NA testing? Comments-(include information on repairs made prior to testing,and recommended follow-up for failed tests) 'If the entire depth of the sump is not tested,specify how much was tested. If the answer to pfly of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)