Laserfiche WebLink
4) CEI SerieMOO <br />GENERAL SYSTEM SPECIFICATIONS <br />The overall Series 3000 system is capable of providing all of the various <br />functions outlined in this performance specification. However, since some <br />functions may not be needed at different sites, the system is configurable to <br />allow selection of specific functions to be implemented at specific locations. <br />• The fully integrated operating system communicates between the retail site <br />and remote locations via dedicated modems and telephone lines. <br />• Any data, variable, alarm, configuration parameter, etc., retained for record <br />purposes will also be available on displays and for printing (such as current <br />status and histories of leak tests and alarms, etc.). <br />• The on and off-site record retention capabilities are sufficiently flexible to <br />satisfy U.S. EPA regulatory requirements and Local Codes where applicable. <br />This includes the immediate response to on-site inspection requests for <br />information. <br />• The equipment is manufactured and operated in accordance with performance <br />and safety specifications prescribed by all national building codes and the <br />National Fire Prevention Association (NFPA). <br />Site OUerajipgjQgnjrol (SOC) Unit <br />• A line test is initiated automatically after each dispensing cycle of the pump. <br />(Refer to the appropriate sections for the line leak test requirements.) <br />• Whenever a line leak test is run, the SOC Unit will try to do the best test <br />possible for current conditions. <br />Upon completion of any tank or line leak test, the system will store and display <br />all required information and alarms. <br />• All probe alarms are recorded and displayed. <br />• Auxiliary relay contacts are provided for ancillary items, such as repeat alarms, <br />remote status indicators, additional horns, etc. <br />• Documented certification by Underwriters Laboratories is provided for all <br />equipment located at the retail facilities. <br />• All leak detection equipment and systems provided meet or exceed all <br />U.S.EPA regulations, standards, and requirements and/or the applicable Local <br />Codes, whichever is more stringent, for leak detection sensitivity and per- <br />formance (i.e., acceptable probability of leak detection and false alarms). <br />• Third party certification of line and tank leak detection performance is <br />provided. This includes the annual and monthly precision testing for both tank <br />and line leak detection and the Regulatory test for line leak detection. <br />1: Page 1 <br />