Laserfiche WebLink
L <br />iJ <br />C' <br />n <br />I <br />Name of i Tank Level-•• <br />Versiont aph Normal•s- <br />Limitations on the Results <br />The performance estimates above are only valid when: <br />• The method has not been substantially changed. <br />• The vendor's instructions for installing and operating the ATGS are followed. <br />• The tank contains a product identified on the method description form. <br />• The tank is no larger than 15,QQQ gallons. <br />• The tank is at least 500 percent full. <br />• The waiting time after adding any substantial amount of product to the tank is 6 hr, <br />40 min hours. <br />• The temperature of the added product does not differ more than 6.5 degrees <br />Fahrenheit from that already in the tank. <br />• The total data collection time for the test is at least hours. <br />Other limitations specified by the vendor or determined during testing: ---- <br />> Safety disclaimer: This test procedure only addresses the issue of the ATG system's <br />ability to detect leaks. It does not test the equipment for safety hazards. <br />Of4in tion of Results A <br />I certify that the ATGS was installed and operated according to the vendor's instructions <br />and that the results presented on this form are those obtained during the evaluation. I <br />also certify that the evaluation was performed according to one of the following: <br />® standard EPA test procedure for ATGS <br />® alternative EPA test procedure for ATGS <br />G. Joe Hennon/J. D. Flora Midwest Research Institute <br />(printed name) (organization performing evaluation) <br />`425 Volker Blvd., Kansas City, MO 64110 <br />@jdnature) (city, state, zip) <br />F-- It 9:J <br />.•i <br />��hone number) <br />ATGS - Results Form Page 2 of 2 <br />