COMPLIANCE INFO_1992-2000 - Laserfiche WebLink

Home Browse Search

LI I E Evaluation Results This method, which declares a tank to be leaking when the measured leak rate exceeds the threshold of 0-05 gallon per hour, has a probability of false alarms [P(FA)] of 08 %. The corresponding probability of detection [P(D)] of a 0.1 gallon per hour leak is 99.2%. Therefore, this method 0 does El does not meet the federal performance standards established by the U.S. Environmental Protection Agency (0.10 gallon per hour at P(D) of 95% and P(FA) of 5%). 0 * 0 1 s ing Evaluation The evaluation testing was conducted in a 10 000 gallon 0 steel 0 fiberglass tank that was 96 inches in diameter and 324 inches l6ng. - The tests were conducted with the tank 95 percent full. The temperature difference between product added to fill the tank and product already in the tank ranged from -6.4 OF to 7.4 OF, with a standard deviation of 4.3 OF. The product used in the evaluation was No. 2, Diesel . Volumetric TTT Method - Results Form Page 1 of 2 R&Its of U.S. EPA Standard Oluation Volumetric Tank Tightness Testing Method This form tells whether the tank tightness testing method described below complies with the performance requirements of federal underground storage tank The regulation. evaluation was conducted by the equipment manufacturer or a consultant to the consultant to the manufacturer according to the U.S. EPA's "Standard Test Procedure for Evaluating Leak Detection Methods: Volumetric Tank Tightness Testing Methods." The full evaluation report also includes a form describing the method and a form summarizing the test data. Tank owners using this leak detection system should keep this form on file to prove compliance the federal Tank with regulations. owners should check with State and local agencies to make sure this form satisfies their requirements. Method Description Name CEI 3000 Tank Level Module (TTT Normal Test Mode) Version Number TLP2 Vendor Control Engineers, Inc 107 Menard Road (street address) LI I E Evaluation Results This method, which declares a tank to be leaking when the measured leak rate exceeds the threshold of 0-05 gallon per hour, has a probability of false alarms [P(FA)] of 08 %. The corresponding probability of detection [P(D)] of a 0.1 gallon per hour leak is 99.2%. Therefore, this method 0 does El does not meet the federal performance standards established by the U.S. Environmental Protection Agency (0.10 gallon per hour at P(D) of 95% and P(FA) of 5%). 0 * 0 1 s ing Evaluation The evaluation testing was conducted in a 10 000 gallon 0 steel 0 fiberglass tank that was 96 inches in diameter and 324 inches l6ng. - The tests were conducted with the tank 95 percent full. The temperature difference between product added to fill the tank and product already in the tank ranged from -6.4 OF to 7.4 OF, with a standard deviation of 4.3 OF. The product used in the evaluation was No. 2, Diesel . Volumetric TTT Method - Results Form Page 1 of 2