Laserfiche WebLink
C <br />D. Results of TestinglServicing <br />Software Version installed: _123.02 <br />.J <br />x Yes ❑ No* <br />Is the audible alarm operational? <br />x Yes ❑ No* <br />is the visual alarm operational? <br />x Yes ❑ No* <br />Were all sensors visually inspected, functionally tested, and confirmed operational? <br />x Yes ❑ No* <br />Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their <br />proper operation? <br />❑ Yes ❑ No* <br />If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) operational? <br />x N/A <br />x Yes ❑ No" <br />For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment monitoring system <br />❑ NIA <br />detects a leak, fails to operate, or is electrically disconnected? if yes: which sensors initiate positive shut -down? (Check all that apply) <br />c Sumprrrench Sensors; ❑ Dispenser Containment Sensors. Did you confirm positive shut -down due to leaks and sensor <br />failure/disconnection? ❑ Yes; ❑ No. <br />❑ Yes ❑ No* <br />For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no mechanical overfill prevention <br />x NIA <br />valve is installed), is the overfill warning alarm visible and audible at the tank fill point(s) and operating property? if so, at what percent <br />of tank ca acidoes the alarm r? % <br />❑ Yes' x No <br />Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the <br />manufacturer name and model for all replacement parts in Section E, below. <br />❑ Yes* x No <br />Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) ❑ Product; i 1 Water. If <br />es, describe causes in Section E, below. <br />x Yes ❑ No* <br />Was monitoring system set-up reviewed to ensure proper settings? Attach set up reports, if applicable <br />x Yes ❑ No* <br />is all monitoring equipment operational per manufacturer's specifications? <br />in Section E below, describe how and when these deficiencies were or Will be correctea. <br />Monitoring System Certification Page 2 of 4 <br />UAIA <br />2/21/07 <br />