COMPLIANCE INFO_2007-2009 - Laserfiche WebLink

Home Browse Search

Page 6 of 14 r4AP P/C 10. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer IY1 Industry Standard ❑Professional Engineer ❑ Other(Specify) Test Method Used: ❑Pressure ❑Vacuum EI Hydrostatic ❑Other(Specify) Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: 0.0025 Sump i Sump 2 Sump 3 Sump 4 Sump Diameter: 42" 42" 42" 42" Sump Depth: 56" 56" 56" 56" Sump Material: Fiberglass Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of 18" 18" 18" 18" Highest Piping Penetration: Height from Tank Top to Lowest 12" 12" 12" 12" Electrical Penetration: Condition of sump prior to testing: Dry Dry Dry Dry Portion of Sump Tested 2" above product 2" above product 2" above product 2" above product Does turbine shut down when sump sensor detects liquid(both product and ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑Yes ❑ No ® NA ❑Yes ❑ No ® NA water)?* Turbine shutdown response time See comment Is system programmed for fail-safe ❑ Yes ❑ No ® NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA shutdown?' Was fail-safe verified to be ❑ Yes ❑ No ® NA ❑Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA o erationalT Wait time between applying pressure/vacuum/water and starting 5 min 5 min 5 min 5 m i n test: Test Start Time: 2:00 PM 2:00 PM 1:00 PM 11:30 AM Initial Reading(Ri): 0.0025 0.0025 0.0025 0.0025 Test End Time: 2:30 PM 2:30 PM 2:00 PM 12:00 PM Final Reading(RF): 0.0025 0.0025 0.0025 Test Duration: 30 min 30 min 30 min Change in Reading(RF-Ri): 0 0 0 Pass/Fail Threshold or Criteria: 1/16 hr 1/16 hr 1/16 hr 1/16 hr Test Result: [R] Pass ❑ Fait ® Pass ❑ Fail ❑ Pass L7 Fail 91 Pass ❑Fail Was sensor removed for testing? ® Yes ❑ No ❑ NA ®Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Was sensor properly replaced after ®Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA testing? Comments—(include information on repairs made prior to testing,and recommended follow-up for failed tests) Turbine shut down done during Annual Monitoring certification. Sump 3 leak possible from 1 of 4 electrical penetration of seam. ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)