COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

North America Job Hazard Analysis EPINI BMP Maintenance Project Name: John Deere Landscapes(Former LESCO Facility) Project Number: 0129740 Job/Task Name: BMP Maintenance JHA No.: 13 Task Step Hazard Control Measures Roll out straw mats and install Hand Injury. Wear leather gloves. with metal tacks by hand or Inspect hammer to snake sure the handle is not with hammer(if necessary). cracked and the head of the hammer is intact. Roll out straw wattles and 0 Use hammer that weighs 5 lbs or less. install with wooden stakes by 0 Do not hold wooden stake by hand. Use channel- hand or with hammer(if locks or other devices. necessary). 0 Hold the hand a few inches away from the head of the hammer to prevent cruslung injury to finger/hand. Uneven terrain,working on a sloped surface. Use caution when moving around on slope;be aware of surroundin s. Removing silt fence by hand or Hand Injury. Wear leather gloves mechanically. If necessary to Uneven terrain. Use caution when moving around on slope;be aware of remove mechanically,use a Pinch points. surroundings. small excavator with a chain Injury by mechanical equipment. Use a spotter when removing silt fence by mechanical means rapped around the stakes to Damage to mechanical equipment. to prevent silt fence from entangling and causing damage to pull up the silt fence. Or,pull equipment. the silt fence by attaching the Place the excavator or the truck in park/neutral and set chain to the stake to the trailer parking brake before exiting cab or when the spotter is placing hitch and driving slowly after the chain around the stakes. Do not operate the it is attached securely. truck/excavator until the spotter is a safe distance away. Personal Protective Equipment Re aired for this Task: Type Description Level D Hard hat,safety glasses,safety vest,steel-toed boots,work gloves. Training Required for this Task: Type Description ERM North America 3 Form Rev.:05-08