Laserfiche WebLink
North America Job Hazard Analysis <br /> EIT <br /> R <br /> Well Maintenance and Obstruction Removal <br /> Project Name: John Deere Landscapes(Former LESCO Facility) <br /> Project Number: 0129740 <br /> Job/Task Name: Well Maintenance and Obstruction Removal <br /> JHA No.: 14 <br /> Task Step Hazard Control Measures <br /> Stress,back strain during prolonged standing, Take breaks and stretch when feasible. Alternate tasks when <br /> kneeling down,and bending over at the waist to feasible to prevent back and knee injuries. <br /> perform maintenance,etc. <br /> Slips,trips,and falls. Employee awareness while walking,and training in <br /> recognition of hazards. <br /> Contact with groundwater when handling wet Use disposable nitrile gloves;replace between well locations <br /> equipment placed down the well. and as needed. <br /> When portable generator is used: <br /> Noise. Use hearing protection within 20 feet of generator. <br /> Burns and fire hazard. Avoid touching the hot surface of the generator. <br /> Store fuels (if used)at least 20 feet away from the generator. <br /> When in parking lots,sidewalks,and on city <br /> streets: Implement traffic control plan where applicable(See Traffic <br /> Physical injury from vehicle collisions,foot traffic. Control JHA). Demarcate the work area.Place safety cones <br /> and signage alerting drivers and pedestrians regarding the <br /> work in progress. Wear high-viability safety vests • <br /> Heat(during summer months). <br /> See Work in Hot Environments JHA. <br /> If Engage Subcontractors Subcontractors who have not been evaluated Use only ERM subcontractors who are identified as having <br /> against ERM minimum safety standards or who do met our minimum safety standards. In cases where using an <br /> not meet minimum safety standards may pose more already-qualified subcontractor is not possible,ensure extra <br /> risk. precautions are taken to provide safety oversight to the work. <br /> ERM North America 2 Form Rev.:05-08 <br />