Laserfiche WebLink
0705686SV.doc <br /> October 10,2007 <br /> Page 2 of 3 <br /> IMMEDIATELY FOLLOWING COMPLETION OF WORK PERMITTED HEREIN, PERMITTEE SHALL FILL <br /> OUT AND MAIL NOTICE OF COMPLETION PROVIDED BY GRANTOR. <br /> Permittee's attention is directed to Section 6, "CONTROL OF MATERIALS", of the State <br /> I Standard Specifications Reference to Engineer in the State Standard Specifications <br /> shall include State Representative. <br /> Permittee is directed to Standard Specification section 7-1.11 Preservation of Property, <br /> and Business and Professions Code, Section 8771. Permittee shall physically inspect <br /> the work site and locate survey monuments prior to work commencement. Monuments <br /> shall be referenced or reset in accordance with Business and Professions Code. <br /> All work shall be conducted in such a manner that the excavation, excavated earth, <br /> materials and equipment will not cause any inconvenience to the highway traffic or to <br /> traffic entering the highway from any public or private approach. <br /> No earth or construction materials are to be dragged or scraped across the highway <br /> pavement. No excavated earth shall be placed or allowed to remain at a location where <br /> it can be tracked onto the highway traveled way or any public or private approach by the <br /> Permittee's construction equipment, or by traffic entering or leaving the highway <br /> traveled way. Any excavated earth or mud so tracked onto the highway pavement or <br /> public or private approach shall be immediately removed by the Permittee. <br /> In addition to the attached General Provisions (TR-0045), the following special <br /> provisions are also applicable for installation and monitoring of groundwater monitoring <br /> wells: <br /> 1. Unless specifically authorized elsewhere in this permit, survey work shall not be <br /> performed: <br /> A. On holidays or an afternoon proceeding a holiday. <br /> B. In medians. <br /> C. When work requires traffic control on lanes. <br /> 2. Permittee shall furnish, place and maintain required signs, safety equipment, traffic <br /> control, and warning devices in accordance with Caltrans manual on Uniform Traffic <br /> Control Devices 2003. <br /> ' 3. All personnel shall wear hard hats and orange vests, shirts or jackets as appropriate. <br /> ' 4. Unless specifically authorized in this permit, markings within the right of way shall be <br /> temporary. Paint used for markings shall be water-soluble and other markers shall <br /> be removed upon completion of work. <br /> t5. Any collected data requested by Caltrans shall be furnished to Caltrans without <br /> charge. <br /> 2 <br />