Laserfiche WebLink
F <br /> D. Results of Testing/Servicing <br /> Software Version Installed: 324.02 <br /> Complete the follov�W g checklist: <br /> x Yes No* Is the audible alarm operational? <br /> x Yes No* Is the visual alarm operational? <br /> x Yes No* Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> x Yes No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their <br /> DroDer oDe iga? <br /> x Yes No* If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem)operational? <br /> WA <br /> x Yes No* For pressurized piping systems,does the turbine automatically shut down if the piping secondary containment monitoring system <br /> N/A detects a leak,fails to operate,or is electrically disconnected? If yes:which sensors initiate positive shut-down? (Check all Not apply) <br /> x Sumprrrench Sensors; x Dispenser Containment Sensors, Did you confirm positive shut-down due to leaks and sensor <br /> _Lailuretdisconnectign? x Ye g; No. <br /> x Yes No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(.e.no mechanical overfill prevention <br /> N/A valve is installed),is the overfill warning alan-n visible and audible at the tank fill point(s)and operating properly? If so,at what percent <br /> I- of tank caDacit does the alarm trianer? % <br /> Yes* No Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the <br /> manufacturer name and model for all reelacement its in Section E,below. <br /> x Yes. No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) Product; xWater. If <br /> _12ELdescribe causes in Section E,below. <br /> x Yes No* Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> x Yes No* Is all monitoring equipment operational Eer manufacturer's specifications? <br /> In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: <br /> Found small amount of water in 87 Fill and 91 Fill. Removed Water. <br /> Monitoring System Certification Page 2 of 4 12107 <br /> 2 2/21/07 <br />